Bolun Bicycle

Original Bicycle Parts for Wholesale: Derailleur Hangers, Rims, and Matching Hardware

Time: 2026-11-14

Read: 0

BOLUN supplies original bicycle parts to distributors, importers, bike shop chains and private label brands. We make the parts we already tool for our own frames. We also open new moulds for repeat orders at volume. No parcel post, no posted unit price. Every part ships by the container or by mixed loading.

What We Supply

Two core lines on this page, plus the small hardware that goes with them.

  • Derailleur hangers: aluminium 6061 or 7075, or steel where the frame spec calls for it.
  • Rims: aluminium alloy, machined, anodised or painted, for mountain and city bikes.
  • Matching bolts, nipples and rim tape, where your order needs them.

If you need a part we do not list, send the drawing or the sample. We will tell you if we can tool it.

Derailleur Hangers: Material and Tolerance

A hanger is a cheap part that protects your frame. If it bends, it breaks. If it is wrong, the rear derailleur will not shift.

Material options:

  • 6061 aluminium: standard, easy to machine, good for most alloy frames.
  • 7075 aluminium: stronger, used on higher-spec frames and repeated impact use.
  • Steel: for frames where the hanger is welded or brazed into the dropout.

Process:

  • CNC machined from solid bar for low to medium volumes.
  • Forged then CNC finished for high volumes, where the mould cost is justified.

The numbers that decide fit:

  • Thread spec for the derailleur bolt, usually M10 x 1 or the thread your frame standard uses.
  • Mounting hole centres and hole diameter, measured off the frame dropout.
  • Plate thickness, held to the tolerance class written on our drawing.
  • Alignment with the hanger bolt, checked on a gauge before packing.

We do not sell hanger shapes as a universal fit part. Each hanger fits a frame model.

Hanger Fitment: How We Match It

Fitment is confirmed against your frame code or a photo of the dropout. We do not publish a hanger number we have not checked against your frame.

What you send us:

  • The frame code printed on your frame, or the model and year.
  • A clear photo of the dropout, straight on, with the old hanger fitted or removed.
  • A photo of the hanger you currently run, front and back.
  • The rear derailleur model you fit, so we match the thread and the B-knuckle angle.

How we check it:

  • We compare your photos against our frame drawings and our hanger library.
  • We measure the hole centres, the thread size and the plate thickness off the dropout.
  • We set the hanger on an alignment gauge and check the derailleur bolt angle.

If it does not line up:

  • We may modify an existing hanger to clear your dropout.
  • If no shape in our library fits, we open a new mould for a repeat order.
  • We send the first article back to you for trial fit before we cut the rest.

Rims

We build rims to your width and hole count, not from a fixed catalogue.

  • Material: aluminium alloy; the extrusion grade is chosen for your rim use and written on the spec sheet.
  • Inner width: built to the width your tyre size calls for; the figure is on the spec sheet.
  • Spoke count: drilled to the hole count you specify on the PO, to match your hub and tyre.
  • Finish: machined side walls, then anodised or painted to your colour reference.
  • Valve hole: Schrader or Presta, drilled as you specify on the PO.
  • Roundness and spoke hole position are checked on a jig before packing.

Tolerance on the rim: radial runout and lateral true are held to the class we agree with you. We write the figure on the spec sheet, not on this page.

Tolerance: What We Hold and How You Check It

Some tolerances come off the drawing. Hole pitch, thread size and plate thickness follow the frame drawing or the sample you send.

Other tolerances work backwards from your assembly. If your derailleur, hub or brake has its own limit, we hold the rim or hanger inside that limit.

You check the parts on receipt with the tools a workshop already has:

  • An alignment gauge for hanger angle.
  • A caliper for plate thickness and hole pitch.
  • A trial fit on a dropout or a test wheel before you sell the batch.

Tolerance is not the smaller the better. A hanger that measures tight but will not bolt on is scrap, not a premium part. We hold the tolerance that lets your line fit the part, every time.

FOB Price and Volume Tiers

All prices are FOB Xingtai or Tianjin, on request. No posted unit price. Price moves with volume.

The tier you land in is decided by the quantity in one shipment, not by the yearly figure you mention in the email. Each tier carries its own price on request, and the tier is quoted against the packing list, not against a range on a website.

How the tiers work:

  • We quote off existing moulds when your part is already in our library. No tooling fee.
  • We improve the piece rate on repeat orders that run through the same tooling.
  • When your part needs a new mould, the tooling is quoted as a separate line.

Tooling cost is never hidden in the piece price. You see the number on the proforma invoice before you pay.

Tooling: Existing Moulds vs New Moulds

We hold moulds for the parts we run on our own bikes. Those parts carry no tooling fee.

New moulds are opened when:

  • Your part shape is not in our library, and
  • The annual volume justifies the cost.

Process:

  1. You send the drawing, sample or hanger gauge.
  2. We quote tooling cost, lead time and the piece price at your tier.
  3. First article is sent for your approval before mass production.
  4. Mould lead time is stated on the quotation once we have your drawing.

Tooling is a separate line item: quoted, amortised over your first orders or bought outright, with ownership written into the contract before the tool is cut. Do not assume the mould is yours.

When a new mould is not worth it:

  • One-off parts with no repeat order behind them.
  • Shapes that can be CNC cut from bar stock cheaper than a mould.
  • Parts where the frame maker already holds the tooling.

Mixed Batch and Mixed Container

You do not need one part number to fill a container.

Mixed batch rules:

  • Each part number in a mixed order carries a minimum set by part type; we state it on the quotation.
  • Hangers, rims and small hardware can share one container.
  • Mixed loading with complete bikes is allowed: parts in their own cartons, bikes in theirs.
  • A mixing surcharge applies when an order is spread over many small lines. We state the rate on the quotation, and waive it when your total shipment reaches the agreed level.

Packing numbers are issued per model with the quotation: pcs per carton, carton size, gross and net weight, and load per 20GP and 40HQ. What we need from you first is the loading form — full container, mixed container, or CKD/SKD.

Why buyers mix:

  • They fill gaps in their catalogue without ordering a full container of hangers.
  • They ship parts with a bike reorder and save on freight.
  • Their dealers get fast replenishment on wear parts.

On the documents:

  • Each part line has its own carton, its own shipping mark and its own HS code.
  • The packing list splits parts and bikes into separate lines.
  • The customs declaration names parts and bikes separately. We do not merge them.

What Is in Your Quotation

When we send the spec sheet and price, you will see these line items:

  • Material grade: the aluminium or steel we run, matched to your use.
  • Thread spec: the derailleur bolt thread, set by your frame standard.
  • Hole pitch: the distance between mounting holes, off your dropout.
  • Plate thickness: the hanger plate size, held to drawing tolerance.
  • Tolerance class: how tight we hold the part, agreed before we cut.
  • Spoke count: the hole count you drill to, matched to your hub.
  • Inner width: the rim inner width, matched to your tyre.
  • Roundness: radial runout on the rim, checked on a jig.
  • Tier quantity: the shipment volume your price is built on.
  • Tooling cost: the mould fee, quoted apart from the piece price.
  • Tooling ownership: who holds the mould, written into the contract.
  • Carton qty: pieces per carton, used for your warehouse plan.
  • Load per 20GP and 40HQ: how many pieces fill each container.
  • Lead time: the weeks from order confirmation to ready stock.

What We Need From You to Quote

Send these five items and we come back with a spec sheet.

  1. Part name: hanger, rim, or the drawing of a custom part.
  2. Frame model and frame code, or a clear photo of the dropout.
  3. Quantity: first order, and expected volume per year.
  4. Finish and logo: anodised colour, paint code, silk screen or water decal.
  5. Destination port and certification market, so we quote the right documents.

Where Orders Usually Go Wrong

We list these up front so you do not learn them the hard way.

  • Tolerance mismatch: hanger holes do not line up with the dropout. Measure before you order, not after.
  • Material downgrade: cheaper aluminium bends and cracks on the first curb. Stick to 6061 or 7075 as specced.
  • Mould ownership not written down. When you reorder through another factory, you may pay the tooling again.
  • Valve hole drilled wrong on a rim batch. Confirm Schrader or Presta on the PO.
  • Mixed loading where parts and bikes share one mark. Customs holds the whole container.

Next Step

Send the five items above to the RFQ page. We answer with a spec sheet and a price within the working days stated on the quotation we send you — not a promise on a web page, because the answer time depends on how complete your RFQ is.

Where this sits on the site

If you are putting a container together, the pages below carry the model range, the trade terms and the quote form.