Bolun Bicycle

Kids Bikes for Importers. Built by a Factory That Has Done This for Years.

Time: 2026-11-14

Read: 0

BOLUN builds kids bikes in Xingtai, Hebei. The kids line runs under Xingtai Buao Children’s Toys Co., Ltd. We sell to importers, bike shop chains and private label brands, by the container. This page covers what we ship, what each market asks for, and where orders go wrong.

Sizes and What Each One Is For

We build five wheel sizes plus balance bikes.

Each wheel size covers a height band, not a birthday. The band for each size is on the spec sheet, because it changes with frame geometry and saddle height, and a band copied off a website is how kids end up on the wrong bike.

Same inch, different bike. A 16″ cruiser frame and a 16″ BMX frame put a child at two different heights. The top tube slope, saddle rail length and crank length all change the usable reach. That is why we will not quote one height band from a catalogue table. The band travels with the spec sheet for the geometry you pick.

What each size is built for:

  • 12″: first pedal bike for a child who has never ridden. Coaster brake only, training wheels fixed, no hand lever to confuse. We keep the gear ratio low so the bike moves under a light push.
  • 14″: still learner territory, but the rider can start to use a hand brake. Coaster plus optional front lever. Training wheels stay on.
  • 16″: the first size where most buyers ask for dual brake. The rider is strong enough to pull a lever properly. Training wheels become optional, not standard.
  • 18″: no training wheels by default. The child has balance now. Dual brake front and rear. This is where some buyers ask for a junior gear set.
  • 20″: the largest kids size, usually a junior MTB or BMX style. Dual brake, V-brake or disc on request. Gears are common here, single-speed on request.
  • Balance bike: no pedals, no hand brake, the child pushes with feet. It is the on-ramp to a 12″ pedal bike.

Balance bikes and pedal bikes share the same welding line. We nest balance bike frames into the gaps between 12″ and 14″ runs. One container can carry both. This keeps the welding shop busy across the season and shortens lead time on mixed orders.

Brakes and the Steering Limiter

  • Coaster brake (foot brake): rear hub brake, no hand lever, fewer parts to fail. Standard on 12″ and 14″.
  • Hand brake: front and rear lever brakes, short-pull levers for small hands. We quote the lever reach in mm on the spec sheet.
  • Dual brake: coaster rear plus hand brake front, most common for 16″ and up. Some EU buyers ask for it across the range.

Steering / handlebar limiter. This bolt or tab stops the bars turning past a set angle. Without it, the bars spin full lock and push the fork blade into the rider’s leg. EN71 expects it. We fit it on 12″–16″ by default. Ask if your market wants it on 18″–20″ too.

Saddle and stem adjustment. Seat post travel and stem travel are quoted in mm on the spec sheet. We quote real travel, not the word “adjustable”.

Certification by Market

Certification is per market and per model. One test report does not cover your whole order.

EU market:

  • CE marking on the frame and the carton.
  • EN71: small parts, paint coating, sharp edges, lead in surface coating.
  • EN ISO 8098: bike safety standard for young children. Frame and fork strength, brake performance, steering lock, wheel torque, tested by a notified body.
  • We ship the test report and CE declaration of conformity with the documents.

US market:

  • CPSC bicycle rules for children’s bikes.
  • CPSIA: lead in substrate and coating, plus a permanent tracking label on every frame.
  • US buyers usually ask for a third-party lab test, not our internal report.

Cost and retest rules:

  • Test fees are paid by the buyer on the first order of a new model, billed per frame geometry per market. The lab invoices them directly; we do not mark them up. We test once per geometry per market. New colour or decal needs no retest. New size, new brake setup or a new fork usually does, because those change what the report measured.
  • The lab report and the CE declaration carry the certificate numbers. They are issued against the model we tested, so they travel with the quotation and the shipping documents. A certificate number printed on a page before the report is released is a number nobody can honour.

Packing, Carton and Container Loading

Kids bikes ship semi-knocked-down (SKD) to save cube. Fully assembled packing is on request.

Packing numbers are issued per model with the quotation: pcs per carton, carton size, gross and net weight, and load per 20GP and 40HQ. What we need from you first is the loading form — full container, mixed container, or CKD/SKD. Those three give different carton counts and different freight per unit, and the gap is big enough that a number quoted without the loading form is worthless.

Shipping mark: buyer logo, model, wheel size, colour, carton number of N, gross and net weight, made in China. We print to your artwork, or use a standard mark if you have none.

Manual and tool kit: one English manual and one multi-tool per carton. The manual carries warnings and assembly steps. The tool kit has Allen keys for training wheels and pedals.

Carton and drop test:

  • Drop test: we follow the lab’s own protocol. A packed carton is dropped corner-first, edge-first and flat. The drop height is set by the test house and written into the spec sheet.
  • Stacking test: the loaded carton sits under a defined top load for a defined hold time. The load and the hours come from the same protocol. Sea freight stacks three to five cartons high; weak ones crush below.
  • Carton board: five-layer corrugated, graded on the spec sheet by edge crush and grammage. We upgrade the grade for hot, humid routes.

Warning Labels and Traceability

  • EU: age warning, “wear a protective helmet”, small parts warning for under 3, EN71 wording.
  • US: CPSC tracking label on the frame: factory ID, production date, batch number. Not optional.
  • If your brand has its own label set, send the wording. We silk-print or stick it on.

Brown carton vs colour box:

  • Brown carton: plain export carton, lower unit cost, for importers who repack locally.
  • Colour box: full-colour printed carton with your artwork, plus a setup fee. We quote the difference per unit.
  • Our advice: first order in brown carton. Move to colour box once repeat volume holds.

The Data Items on Our Quotation

Our quotation and spec sheet carry a fixed set of numbers. We list them here so you know what to expect. None are guessed on this page.

  • Pcs per carton: how many bikes go in one export carton. It drives both the unit packing cost and the cube math.
  • Carton size (L×W×H): the outer box dimensions. The forwarder uses it to work out how many cartons fit in a container.
  • Gross weight: carton plus bike plus accessories. The forwarder bills on this number.
  • Net weight: the bike alone. You use it for landed cost and duty calculation.
  • Load per 20GP: how many units fit a 20-foot container at the quoted SKD packing.
  • Load per 40HQ: the same, for a 40-foot high cube. The two are not a fixed ratio; SKD packing changes them.
  • Drop test method and height: the protocol the carton passed. Your local QC repeats the same one on arrival.
  • Stacking test load and hold time: how high the carton can sit in a sea container stack.
  • Carton board grade: edge crush and grammage. We upgrade it for hot, humid sea routes.
  • Certificate numbers: CE, EN71, EN ISO 8098, CPSIA. Issued by the lab, they travel with the shipping documents.
  • Test lead time: weeks from sample to report release. It sets the earliest date the carton artwork can be printed.
  • MOQ per size: the minimum order quantity for one wheel size, at the loading form you pick.
  • Colour MOQ: the minimum for a second colour on the same model.
  • Seat post and stem travel: real mm numbers. Parents and bike shops ask for this.
  • Lever reach: mm from grip to lever. Short-pull levers are built for small hands.

MOQ and Loading Tiers

MOQ is not one number for the whole catalogue. It is set per model, per colour and per loading form: one model one colour in a full container, one model in several colours, several models mixed in one container, and CKD/SKD all sit at different numbers. Ask for the tier that matches your container and we quote that tier.

Order Timeline From Deposit to Shipment

A kids bike container moves in five stages. The first stage is the one most likely to slip past the season window.

  1. Certification test scheduling. Book the lab slot before the frame geometry is locked. The report takes weeks, and we cannot print CE wording or carton artwork until it is released. If the geometry changes after the test starts, we restart the clock. This is the stage that eats the season.
  2. Frame welding and painting. Once the test sample is approved, we weld the production frames. Pretreatment, E-coat and topcoat run in batches.
  3. Wheel building and assembly. Rims are laced to hubs, spokes tensioned, brakes bedded in. SKD packing keeps the wheels built but the handlebar and pedals loose.
  4. Packing and drop-test sampling. Cartons are sealed, then a sample carton is dropped and stacked per the protocol. A failed sample means a carton upgrade and a re-sample.
  5. Container loading. We load by weight and cube, and re-check the balance bike ratio before the seal goes on.

What We Need From You to Quote

  1. Sizes and brake setups per size, plus balance bikes if needed.
  2. First-order quantity and expected volume per season.
  3. Destination market: EU, US, or another. This sets the certification file and lab cost.
  4. Packing choice: brown carton or colour box, plus your shipping mark artwork.
  5. Loading form: full container of one model, mixed container, or CKD/SKD.
  6. Logo files and colour reference, if private label.

Price is FOB, price on request with volume tiers. Tooling is quoted separately and amortised over your first order.

Where Orders Usually Go Wrong

  • Certification range. A 16″ report does not cover your 12″ and 20″. List every size on the test application from day one.
  • Carton strength. The cheapest carton looks fine in the factory, then crushes in a hot container. Pay for the upgrade.
  • Steering limiter. We fit it by default on 12″–16″. If your market wants it on 18″–20″, write it on the PO.
  • Tracking label. A US shipment needs the CPSC label on the frame. Missing batch code or factory ID holds the container at customs.
  • Balance bike cube. They pack small but weigh light. Buyers over-order cube and under-order weight. We check the loading plan before production.

Next Step

Send the items above to the RFQ page. We reply with a spec sheet and FOB price on request. Turnaround time is stated on the reply, once we know the sizes and the market.

Where this sits on the site

If you are putting a container together, the pages below carry the model range, the trade terms and the quote form.