How to Compare Two Models Before You Ask for a Price
A comparison table on a website always lies a little. Two bikes look the same in a photo and differ in the tube wall, the welding, the paint system and the packing. Those four items move the price far more than the brand on the down tube. So we do not publish a table that compares models by looks. We send the spec sheet for the models you are actually considering, and the comparison is done item by item against that sheet.
The Items That Decide the Price
- Frame material and tube set — steel grade or aluminium grade, plain tube or butted. Butted tubing saves weight and costs money; it is stated per model, not assumed.
- Welding and joint treatment — which joints are TIG, which are MIG, which beads are ground flat. A frame that looks clean in a photo can still show the bead after one season of paint.
- Paint system — pretreatment, primer, top coat, and the film thickness and salt spray hours written into the sheet. Coastal markets and dry inland markets do not need the same paint.
- Drivetrain and brake level — brand level and speed count, rim or disc, mechanical or hydraulic. This is where a cheap quotation is usually made cheap.
- Size run and colour mix — the sizes you actually sell and the number of colours in the container. A colour below the floor share carries a paint change you pay for.
- Packing and loading form — pcs per carton, carton size, gross and net weight, and load per 20GP and 40HQ. FCL, mixed container and CKD give three different freight figures per unit.
Why There Is No Public Table Here
Because the right comparison depends on your market. A model that wins on price in one country loses on paint in another. A size run that fits a chain store does not fit a two-shop dealer. Publishing one table for every buyer would push you toward the wrong model and cost you a season of stock.
What We Send Instead
Tell us the models or references you are weighing up, the quantity of the first order, the destination port and the loading form, and the certification market. We send the spec sheet for each model with the items above filled in, plus the packing plan and a price on request with volume tiers. Then you compare numbers that came from the same factory, on the same date, under the same loading form.
Where to Start
Pick the line first: adult mountain bikes, city and commuter bikes, kids bikes, or original parts. Then send the RFQ with the models you want compared. If you are still at the stage of choosing a supplier rather than a model, the wholesale programme page sets out how an order runs from deposit to loading.
Where this sits on the site
If you are putting a container together, the pages below carry the model range, the trade terms and the quote form.